ZJC-T Series Vacuum Oil-Purifier special for Turbine Oil
When various machine aggregates of steam turbine、hydraulic turbine are in operation, and their turbine oil which used to cool、 lubricate and regulate the speed is easily to be contaminated and form more moisture、impurities、emulsifying etc, which badly damage the security and the lifetime of equipment. And traditional treating way can not solve problems efficiently but cause waste and environmental pollution. After being studied for years, we developed the technique of subsidence of the oblique plate, rotary separation flowing in vacuum and depth filtration in grade. The 5th generation special vacuum oil purifier in Yuneng can fast damage emulsifying, remove water、 air and impurities thoroughly, and also make the turbine oil clear, improve maintenance level of machine aggregates.
Features of Product
1. As the new patent technology Vacuum-segregating is adopt the separated equipment of inflator (Patent No. ZL200420060968.5) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect.
2. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life.
3. The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil.
4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. (Spurting prevention Patent No. ZL200420060973.6)
5. With advantages of no leakage、low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory.
6. In order to meet customer’s needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good.
Item Name of Parameter Type
Unit ZJC0.6KY-T ZJC1.2KY-T ZJC1.8KY-T ZJC3KY-T ZJC6KY-T ZJC9KY-T ZJC12KY-T ZJC18KY-T
Technical parameter of the product Nominal flow capacity L/min 10 20 30 50 100 150 200 300
Working Vacuity Mpa -0.07 ~ -0.101
Working pressure Mpa ≤0.35
Working temperature of Oil ℃ 45-65
Working power 50Hz 380V 3-Phase 4-Wire
Total electric power KW 6+1.5 9+1.5 12+1.5 30+3 2X30+4.4 3X30+6 3X30+7 4X30+11
Diameter of inlet outlet hose mm 32/25 32/25 32/25 38/32 44/38 48/44 64/48 76/64
Appearance dimension cm 130X100X125 130X105X145 130X105X145 190X140X195 190X140X210 210X150X215 220X160X225 230X170X230
Weight of product Kg 320 380 450 850 1100 1500 2000 2900
Oil treatment index Water content ppm ≤100
Viscosity m㎡/s ≤20% in comparison to the original bias value of new oil
Filtering accuracy µm ≤5
Demulsibility min ≤15
Cleanness NAS grade ≤NAS 6
Oil appearance Transparence
oil purifier, oil filter, oil purification machine, oil filtration unit, oil recycling plant, oil purification unit, oil filtration machine, oil recyling unit, oil purification plant, oil filtration plant, oil recycling machine, oil purification system, oil filtration system, oil recycling system,
